Re: [SLUG] Scsi CD rom gone missing

[Peter Rundle <peter.rundle@nospam.altaibc.net.au>]

Thanks for the replies so far, but no cigars yet!

  # cat /proc/scsi/scsi
  Attached devices: 
  Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: WDIGTL   Model: ENTERPRISE       Rev: 1.91
    Type:   Direct-Access                    ANSI SCSI revision: 02
  Host: scsi0 Channel: 00 Id: 01 Lun: 00
    Vendor: SEAGATE  Model: ST39175LC        Rev: 0359
    Type:   Direct-Access                    ANSI SCSI revision: 02
  Host: scsi0 Channel: 00 Id: 08 Lun: 00
    Vendor: SDR      Model: GEM200           Rev: 2   
    Type:   Processor                        ANSI SCSI revision: 02

So there she is sitting at Id: 08, (should I mention that a certain other
Os could see it fine, nah just ignore that little bait!).

So, we've tried 

  # mount -t iso9660 /dev/sdi /mnt/cdrom
   mount: /dev/sdi is not a valid block device

etc etc for all other sd? devices.

  # mknod scd0 b 11 8
  # mount -t iso9660 /dev/scd0 /mnt/cdrom
    mount: the kernel does not recognize /dev/scd0 as a block device

Hmmm, ok perhaps we have to pull the cd-rom out and drop the scsi down
below 7.

P.

--
SLUG - Sydney Linux Users Group Mailing List - http://www.slug.org.au
To unsubscribe send email to slug-request@nospam.slug.org.au with
unsubscribe in the text