Re: [ProgSoc] Modem 14.4K

[Victor Rajewski <vik@nospam.yoyo.cc.monash.edu.au>]

Why do u need to know which modem u have? From my experience, every
unknown modem I've used has worked under win95 as 'Generic'. As for
setting it up, find some AT commnd books/resources and read them
thouroughly. Then it will hopefully work. 

> I have a second-hand modem. Specs,
> Umc chipset. 14.4 K Fax Modem. Manufacturer unknown.
> UART 16550A detected by linux/dos diagnostic tool and windows[emulated?]
> 
> It responds to ATI commands as follows
> at	ok
> ati0	961
> ati1	2128/1A15
> ati2	7A2EBE
> ati3	AT-1414 PCF 04/18/1994 FOR AUSTRALIA
> ati4	V.32bis/ FAX MODEM, ver 4.20
> ati5	ALL PASS
> ati6	ERROR
> 
> Does anyone know which modem I am dealing with?
> 
> An inconsistancies that I have noted is:
> ATI0 should be a `four digit modem product code' which seems to be the
> result of ATI1. I know this from a cisco modem fact sheet.
> 
> Observations from experimentation
> ATS6?	003	Wait before dial
> 		(which is standard for Japan according to the same fact sheet
> 		and non standard elsewhere)
> ATS7?	045	Wait for carrier after dial
> 		(5-50 is used in Japan and not elsewhere from the fact sheet)
> ATS8	002	Pause time for dial delay
> 		(default 0)
> ATS11	095	DTMF Tone dialing speed
> 		(70-100 used in Japan)
> 
> Have I got a modem that is configured (factory default maybe) for use in
> Japan or is the Australian telephone system based on the Japanese system?
> 
> Can someone tell me which modem I have?
> 
> - Hul
> 
> --
> You are subscribed to the progsoc mailing list. To unsubscribe, send a
> message containing "unsubscribe" to progsoc-request@nospam.progsoc.uts.edu.au.
> If you are having trouble, ask owner-progsoc@nospam.progsoc.uts.edu.au for help.
> 
> This list is archived at <http://www.progsoc.uts.edu.au/lists/progsoc/>
> 

vik

vik4@nospam.mindless.com
http://www.progsoc.uts.edu.au/~vik
PGP: http://www.progsoc.uts.edu.au/~vik/pgp.txt


NOTE: No warranties, either express or implied, are hereby given. All
software is supplied as is, without guarantee.  The user assumes all
responsibility for damages resulting from the use of these features,
including, but not limited to, frustration, disgust, system abends, disk
head-crashes, general malfeasance, floods, fires, shark attack, nerve
gas, locust infestation, cyclones, hurricanes, tsunamis, local
electromagnetic disruptions, hydraulic brake system failure, invasion,
hashing collisions, normal wear and tear of friction surfaces, comic
radiation, inadvertent destruction of sensitive electronic components,
windstorms, the Riders of Nazgul, infuriated chickens, malfunctioning
mechanical or electrical sexual devices, premature activation of the
distant early warning system, peasant uprisings, halitosis, artillery
bombardment, explosions, cave-ins, and/or frogs falling from the sky.

--
You are subscribed to the progsoc mailing list. To unsubscribe, send a
message containing "unsubscribe" to progsoc-request@nospam.progsoc.uts.edu.au.
If you are having trouble, ask owner-progsoc@nospam.progsoc.uts.edu.au for help.

This list is archived at <http://www.progsoc.uts.edu.au/lists/progsoc/>